01 Xy Frame Assembly Repair Guide

Difficulty

Easy

Steps

2

Time Required

Suggest a time??

Sections

1

• 01 | XY Frame Assembly
• 2 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackZaribo 3D Printer

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              01 | XY Frame Assembly               

• M8 x 40 screw for each corner. Insert T Nuts before M8 screws and do not tighten them now. Just to keep the frame in shape.
• Blind L metal brackets for Z axis assembly should be inserted before M8 screws as well.
• There are M8 holes for Z axis assembly on the 320mm aluminium extrusions which should be at the back of the XY Frame. Larger hole should be faced to bottom.
• Insert two T-nuts for every corner in order to fasten the L brackets on the next step.
• Do not forget to insert T Nuts for Y motor holder in back and LCD mount in front.

M8 x 40 screw for each corner. Insert T Nuts before M8 screws and do not tighten them now. Just to keep the frame in shape.

Blind L metal brackets for Z axis assembly should be inserted before M8 screws as well.

There are M8 holes for Z axis assembly on the 320mm aluminium extrusions which should be at the back of the XY Frame. Larger hole should be faced to bottom.

Insert two T-nuts for every corner in order to fasten the L brackets on the next step.

Do not forget to insert T Nuts for Y motor holder in back and LCD mount in front.

1024

Step 2

• One Metal L Brackets for each corner.
• Two M6x12 socket cap screws for each metal L brackets.
• Please align the extrusions on a flat surface like glass or marble and then tighten the M8 screws on the corners and the inside L brackets.
• T-Nut insert for each bottom corner.
• Printed Zaribo L brackets.
• Misumi rubber foot for each corner.
• M6x20 socket cap screw.
• Misumi 3030 aluminium extrusion edge cover.

One Metal L Brackets for each corner.

Two M6x12 socket cap screws for each metal L brackets.

Please align the extrusions on a flat surface like glass or marble and then tighten the M8 screws on the corners and the inside L brackets.

T-Nut insert for each bottom corner.

Printed Zaribo L brackets.

Misumi rubber foot for each corner.

M6x20 socket cap screw.

Misumi 3030 aluminium extrusion edge cover.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Murathan Araz                     

Member since: 08/01/2013

735 Reputation

                                      4 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges