Difficulty
Easy
Steps
3
Time Required
10 minutes
Sections
1
- Y Axis Frame
- 3 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Back3DP Prusa B1 Printer
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Video Overview
Step 1
preparing the components
- 2 X axis member
- 2 Y axis member
- 4 L bracket (Printed or Laser cut)
- 4 Rubber feet
- 4 M8 x 40mm socket screws
- 8 M6 x 12mm socket screws
- 4 M6 x 20mm socket screws
- 12 T-slot nuts
2 X axis member
2 Y axis member
4 L bracket (Printed or Laser cut)
4 Rubber feet
4 M8 x 40mm socket screws
8 M6 x 12mm socket screws
4 M6 x 20mm socket screws
12 T-slot nuts
1024
Step 2
- Make sure the sockets for the screws are aligned and in the same side.
- Using the M8 x 40 screws, join the X and Y members
- Tighten just enough to keep the frame assemble together.
Make sure the sockets for the screws are aligned and in the same side.
Using the M8 x 40 screws, join the X and Y members
Tighten just enough to keep the frame assemble together.
Step 3
- Locate the bottom of the frame, where the socket for the head of the screw is drilled.
- On the L bracket place
- 2 M6 x 12mm screws
- 1 M6 x 20mm screw
- Align on the extrusion and tighten the screws
Locate the bottom of the frame, where the socket for the head of the screw is drilled.
On the L bracket place
2 M6 x 12mm screws
1 M6 x 20mm screw
Align on the extrusion and tighten the screws
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Juan Francisco
Member since: 07/31/2018
152 Reputation
1 Guide authored
Badges:
4
+1 more badge
