Difficulty

Easy

Steps

6

Time Required

                          15 minutes

Sections

1

  • Power cord
  • 6 steps

Flags

0

  • BackFan

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Power cord
  • Tip the fan to its side and remove the three size 8 screws using a 9/32 flat-head screwdriver.
  • The screws may be brittle from age, so be careful.
  • Take the bottom plate off the fan and set it aside.

Tip the fan to its side and remove the three size 8 screws using a 9/32 flat-head screwdriver.

The screws may be brittle from age, so be careful.

Take the bottom plate off the fan and set it aside.

1024

Step 2

  • Remove the three number 8 screws that hold the switch in place.

Remove the three number 8 screws that hold the switch in place.

Step 3

  • Remove the switch, carefully sliding the speed lever out of its slot.
  • Don’t remove the switch too quickly or you can damage the head-wire.

Remove the switch, carefully sliding the speed lever out of its slot.

Don’t remove the switch too quickly or you can damage the head-wire.

Step 4

  • Once the switch is free, unscrew the two knurled nuts holding the wires in place.

Once the switch is free, unscrew the two knurled nuts holding the wires in place.

Step 5

  • Turn the switch over and unscrew the nut securing the wire with the 5/16 crescent wrench.

Turn the switch over and unscrew the nut securing the wire with the 5/16 crescent wrench.

Step 6

  • Remove the switch and set it aside, then pull the wire through the grommet.

Remove the switch and set it aside, then pull the wire through the grommet.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Elias Dorna

Member since: 06/08/2016

125 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Texas Tech, Team 3-5, Rauch SU 2016                        

                                                  Member of Texas Tech, Team 3-5, Rauch SU 2016 



                    TTU-RAUCH-SU16S3G5                     


                                            2 Members                     


                                            1 Guide authored

carol w - Nov 2, 2017

Reply

Westinghouse table fan needs new cord (just bought). 18 gauge cord? Where to buy?