1987 Vw Type 2 T3 Dashboard Disassembly Repair Guide

Difficulty

Difficult

Steps

5

Time Required

                          2 - 4 hours            

Sections

1

• 1987 VW Type 2 T3 dashboard disassembly
• 5 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackVolkswagen Transporter T3

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Step 1

              Examine the dashboard               

• Clear all the stuff from your dashboard.
• Then pull the radio out of the shaft.

Clear all the stuff from your dashboard.

Then pull the radio out of the shaft.

1024

Step 2

              Switches and signal lamps               

• With a jerk you lift the cover of the console (dashboard) from the windshield ago.
• Loosen the 4 screws on the left and right of the instrument panel. IMAGE
• Pull the switches in the instrument panel off the plugs and set aside

With a jerk you lift the cover of the console (dashboard) from the windshield ago.

Loosen the 4 screws on the left and right of the instrument panel. IMAGE

Pull the switches in the instrument panel off the plugs and set aside

Step 3

              hazard lights               

• The hazard warning lights have a blue and a brown single cable in addition to the plug

The hazard warning lights have a blue and a brown single cable in addition to the plug

Step 4

              Take away instruments               

• When lifting the instruments (on the side of the speed display), pull the white plug.
• On the back of the speedometer, remove the plugged-in speedometer cable from the white plug. [Br] Now remove the instrument panel

When lifting the instruments (on the side of the speed display), pull the white plug.

On the back of the speedometer, remove the plugged-in speedometer cable from the white plug. [Br] Now remove the instrument panel

Step 5

• Remove the buttons for the ventilation and heating controllers and the rotary switch. PICTURE Then carefully pull the frame of the controls forward.

Remove the buttons for the ventilation and heating controllers and the rotary switch. PICTURE Then carefully pull the frame of the controls forward.

Repeat the steps in order to reassemble your device.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             


        irlanda is helping us fix the world!      Want to contribute?      Start translating › 

Special thanks to these translators:

100%

irlanda

Author

                                      with 1 other contributor 

                    Lukas                     

Member since: 12/25/2013

156 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges