Difficulty

Easy

Steps

5

Time Required

                          5 - 10 minutes

Sections

1

  • Motherboard
  • 5 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • Back1995-2000 Toyota Corolla

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Motherboard
  • Using the Phillips #0 screwdriver, remove the single screw securing the key fob shell.

Using the Phillips #0 screwdriver, remove the single screw securing the key fob shell.

1024

Step 2

  • After removing the screw, remove the back cap of the key shell with a flathead screwdriver and twist the screwdriver sideways.
  • Do not lever it upwards to prevent damage to the inner board.

After removing the screw, remove the back cap of the key shell with a flathead screwdriver and twist the screwdriver sideways.

Do not lever it upwards to prevent damage to the inner board.

Step 3

  • Carefully remove the motherboard inside the now open key without touching any of the inner metal components to prevent damage to the system.

Carefully remove the motherboard inside the now open key without touching any of the inner metal components to prevent damage to the system.

Step 4

  • Once you have removed the board, repeat steps 1-2 with the new key and place the motherboard on the rubber.

Once you have removed the board, repeat steps 1-2 with the new key and place the motherboard on the rubber.

Step 5

  • Place the cap back on the new key and screw everything back into place. Test the key on your vehicle to make sure that all the buttons work.

Place the cap back on the new key and screw everything back into place. Test the key on your vehicle to make sure that all the buttons work.

While this guide shows how to switch the board between shells, unless the key has a removable blade, you will need to get the new one cut with specialized equipment.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    CHRIS A MUNOZ-GALLOZA

Member since: 10/11/2021

121 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       University of Puerto Rico Mayagüez, Team 1-20, Cools Stephens Fall 2021                        

                                                  Member of University of Puerto Rico Mayagüez, Team 1-20, Cools Stephens Fall 2021 



                    UPRM-COOLS STEPHENS-F21S1G20                     


                                            1 Member                     


                                            1 Guide authored