Difficulty
Easy
Steps
4
Time Required
15 - 30 minutes
Sections
1
- Air Filter
- 4 steps
Flags
0
Back1997-2003 Chevrolet Malibu
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Air Filter
- The air filter housing is located on the driver side of the car.
- Loosen the four housing screws on the plastic air intake box.
- Do not try to remove these screws from the intake box, as they are not designed to be removed.
The air filter housing is located on the driver side of the car.
Loosen the four housing screws on the plastic air intake box.
Do not try to remove these screws from the intake box, as they are not designed to be removed.
1024
Step 2
- Loosen the hose-clamp on the air intake tube located on the side of the air intake box.
- Remove the air intake tube from the intake box.
Loosen the hose-clamp on the air intake tube located on the side of the air intake box.
Remove the air intake tube from the intake box.
Step 3
- Gently lift the top off of the air intake box.
Gently lift the top off of the air intake box.
Step 4
- Remove the air filter from the housing and inspect it.
- If it can not be cleaned, then it should be replaced with a new one.
Remove the air filter from the housing and inspect it.
If it can not be cleaned, then it should be replaced with a new one.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 4 other contributors
Sank Yang
Member since: 10/03/2012
484 Reputation
5 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team 9-15, Amido Fall 2012
Member of Cal Poly, Team 9-15, Amido Fall 2012
CPSU-AMIDO-F12S9G15
4 Members
5 Guides authored
