1998 2002 Honda Accord Front Bumper Replacement 1998 1999 2000 2001 2002 Repair Guide

Difficulty

Moderate

Steps

3

Time Required

                          15 - 30 minutes            

Sections

1

• Front Bumper
• 3 steps

Flags

0

• Back1998-2002 Honda Accord

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Front Bumper               

• Locate and remove the bolts in the front of the wheel well on the either side of the car using a #1 Phillips screw driver or an 8 mm socket wrench.
• Locate the bolts on the bottom of both corners of the bumper and remove them using an 8 mm socket wrench or box end wrench.

Locate and remove the bolts in the front of the wheel well on the either side of the car using a #1 Phillips screw driver or an 8 mm socket wrench.

Locate the bolts on the bottom of both corners of the bumper and remove them using an 8 mm socket wrench or box end wrench.

1024

Step 2

• Locate the plastic push pins along the bottom of the bumper.
• Use a small thin prying device, such as a flathead screwdriver, to pop the heads of the push pin up. Then remove the entire push pin assembly from their holes.

Locate the plastic push pins along the bottom of the bumper.

Use a small thin prying device, such as a flathead screwdriver, to pop the heads of the push pin up. Then remove the entire push pin assembly from their holes.

Step 3

• Remove the push pins on the two raised portions of the bumper next to the inside of the headlights.
• There are four clips along the top of the bumper still holding it in place. Gently lift the bumper while pulling it away from the car to free the clips and remove the bumper.

Remove the push pins on the two raised portions of the bumper next to the inside of the headlights.

There are four clips along the top of the bumper still holding it in place. Gently lift the bumper while pulling it away from the car to free the clips and remove the bumper.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Miroslav Djuric                     

156,282 Reputation

                                      144 Guides authored                  



                       Badges:
                       54







                                                        +51 more badges                           

Eddie Jusino - Jul 29, 2016

Reply

Awesome good directions and details

Kenneth Smith - Jan 2, 2018

Reply

This article and other online queries, lead me to believe that the 98’-02’ Accord Coupe bumpers are interchangeable.  Anyone know for sure?  I ask cos’ I want to replace my 99’ bumpers with 02’ bumpers, front and back.