Difficulty
Very easy
Steps
1
Time Required
2 - 5 minutes
Sections
- Seat
- 1 step
Flags
0
Back1999-2002 Suzuki SV650
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Seat
- If you have frame covers below your seat, remove them by removing the 4 mm allen bolts holding them on. Use a 4 mm allen wrench to turn the screws counter-clockwise until they come off.
- Once the frame covers are off, remove the 4 mm allen seat bolts on both sides of the seat. Use the 4 mm allen wrench to turn the screws counter-clockwise until they come off.
- The bolt in the picture is not stock.
- Lift the front of the seat, then pull it off the frame.
If you have frame covers below your seat, remove them by removing the 4 mm allen bolts holding them on. Use a 4 mm allen wrench to turn the screws counter-clockwise until they come off.
Once the frame covers are off, remove the 4 mm allen seat bolts on both sides of the seat. Use the 4 mm allen wrench to turn the screws counter-clockwise until they come off.
The bolt in the picture is not stock.
Lift the front of the seat, then pull it off the frame.
1024
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Phillip Takahashi
Member since: 08/22/2011
85,204 Reputation
87 Guides authored
Badges:
43
+40 more badges
thineownself - Jul 16, 2017
Reply
seat bolts are actually 6mm Allen (side covers are 4mm Allen).
