Difficulty

Moderate

Steps

4

Time Required

                          10 minutes            

Sections

1

  • Headlight Bulb
  • 4 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • Back1999-2004 Jeep Grand Cherokee WJ

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Headlight Bulb               
  • Here is a 2000 Jeep Grand Cherokee with a burned out driver side headlight bulb.
  • Open the hood. On top of the affected headlight assembly is a single 7mm hex bolt.
  • Remove the bolt

Here is a 2000 Jeep Grand Cherokee with a burned out driver side headlight bulb.

Open the hood. On top of the affected headlight assembly is a single 7mm hex bolt.

Remove the bolt

1024

Step 2

  • Remove the bolt. It is approximately 6 inches long.
  • Grab the headlight assembly on the fender side,
  • as well as the grill side.

Remove the bolt. It is approximately 6 inches long.

Grab the headlight assembly on the fender side,

as well as the grill side.

Step 3

  • Then pull the assembly straight out
  • The light bulbs will now be accessible.
  • Remove the bulb by twisting it in a counter clockwise direction, then pulling it out of the headlight assembly.

Then pull the assembly straight out

The light bulbs will now be accessible.

Remove the bulb by twisting it in a counter clockwise direction, then pulling it out of the headlight assembly.

Step 4

  • Use a flathead screwdriver (or similar tool) to lift the socket clip of the tab on the bulb and remove the bulb.
  • Change the bulb and the result will be fully functional headlights.

Use a flathead screwdriver (or similar tool) to lift the socket clip of the tab on the bulb and remove the bulb.

Change the bulb and the result will be fully functional headlights.

To reassemble your headlight, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      18 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    oldturkey03                     

Member since: 09/29/2010

722,317 Reputation

                                      109 Guides authored                  



                       Badges:
                       53







                                                        +50 more badges                           

Team

                       Global Fixers                        

                                                  Member of Global Fixers 



                    Community                     


                                            22 Members                     


                                            240 Guides authored                     

jamesparker1948 - Feb 17, 2016

Reply

guide made this an ABC REPLACEMENT

panther2360 - Feb 22, 2016

Reply

Easy peasy. Thanks!

Steven Adams - Dec 28, 2016

Reply

On my 2001 Jeep Grand Cherokee Limited, there was an extra screw that needed to be removed. I didn’t notice it and, in trying to remove the headlight housing, broke the plastic housing that was held in place by that screw.

FixIt - Oct 26, 2017

You didn’t notice it? I wouldn’t have you working on my car if you’re that careless.

Sheila’Thompson - Sep 30, 2018