Difficulty

Easy

Steps

5

Time Required

                          30 minutes - 1 hour

Sections

1

  • Radio
  • 5 steps

Flags

0

  • Back1999 GMC Sierra Radio Replacement

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Since you’ll be handling electrical cords during this installation, we recommend unplugging the car battery before proceeding with the replacement.

What you need

Step 1

              Radio
  • Use the gear shift to shift the truck from ‘Park’ to ‘1st Gear’ so that the dash face is easily accessible.
  • Pop the dash face off, and place it to the side until the radio has been replaced

Use the gear shift to shift the truck from ‘Park’ to ‘1st Gear’ so that the dash face is easily accessible.

Pop the dash face off, and place it to the side until the radio has been replaced

1024

Step 2

  • Remove the radio from its place.
  • Remove the bundled cable connector from the back of the radio unit.
  • Remove the antenna plug from the back of the radio unit.

Remove the radio from its place.

Remove the bundled cable connector from the back of the radio unit.

Remove the antenna plug from the back of the radio unit.

Step 3

  • Attach the radio plug to the back of the new radio.
  • Also, attach the antenna chord to the back of the new radio.

Attach the radio plug to the back of the new radio.

Also, attach the antenna chord to the back of the new radio.

Step 4

  • Align the slots along the sides of the new radio with the ones in the dash.
  • Push new radio in until you hear a ‘pop’ sound, telling you the new radio is in place.
  • Press the power button on new radio to insure that it works properly.

Align the slots along the sides of the new radio with the ones in the dash.

Push new radio in until you hear a ‘pop’ sound, telling you the new radio is in place.

Press the power button on new radio to insure that it works properly.

Step 5

  • Replace dash face! Then you are finished!

Replace dash face! Then you are finished!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Blake Moss

Member since: 06/01/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Arkansas State University, Team S2-G3, Chamberlain Summer 2017                        

                                                  Member of Arkansas State University, Team S2-G3, Chamberlain Summer 2017 



                    ARSU-CHAMBERLAIN-SU17S2G3                     


                                            1 Member                     


                                            1 Guide authored