Difficulty

Easy

Steps

7

Time Required

                          6 minutes

Sections

1

  • Windshield Wiper
  • 7 steps

Flags

0

  • BackToyota Sienna

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Windshield Wiper
  • Lift the windshield wiper to a 90-degree angle above the windshield.

Lift the windshield wiper to a 90-degree angle above the windshield.

1024

Step 2

  • Tilt the wiper upwards.
  • Pull the wiper blade down to release it from the j-hook.
  • Different brands of wipers use different unlatching mechanisms; these vary from pinching and pulling to pushing a button.

Tilt the wiper upwards.

Pull the wiper blade down to release it from the j-hook.

Different brands of wipers use different unlatching mechanisms; these vary from pinching and pulling to pushing a button.

Step 3

  • Lay the arm back down onto the windshield.
  • Place the arm gently back down to avoid any damage.

Lay the arm back down onto the windshield.

Place the arm gently back down to avoid any damage.

Step 4

  • Remove the plastic protection from the rubber side of the new wiper blades.

Remove the plastic protection from the rubber side of the new wiper blades.

Step 5

  • Lift the wiper arm back up and latch the j-hook around the mounting point of the new blade.

Lift the wiper arm back up and latch the j-hook around the mounting point of the new blade.

Step 6

  • Gently lay the wipers back down onto windshield.

Gently lay the wipers back down onto windshield.

Step 7

  • Start your vehicle.
  • Turn on the windshield wipers to ensure they are functioning properly.
  • Do not turn the engine on in a closed space to prevent carbon monoxide poisoning.

Start your vehicle.

Turn on the windshield wipers to ensure they are functioning properly.

Do not turn the engine on in a closed space to prevent carbon monoxide poisoning.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Mahdi Saleh

Member since: 10/03/2020

145 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       University of North Texas, Team S2-G9, Raign Fall 2020                        

                                                  Member of University of North Texas, Team S2-G9, Raign Fall 2020 



                    UNT-RAIGN-F20S2G9                     


                                            2 Members                     


                                            1 Guide authored