Difficulty
Easy
Steps
6
Time Required
10 - 20 minutes
Sections
1
- Cabin Air Filter
- 6 steps
Flags
0
Back2000-2007 Toyota Corolla
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The cabin air filter in a car is designed to remove pollutants from the air that is contained inside your vehicle, typically behind the glove box. Changing your cabin air filter regularly is important to ensure that you continue to breathe clean air while you drive, as they collect particles and dust, the filter’s capacity to filter more out becomes diminished.
Before beginning, consider bringing a trash bag with you do discard the older filter into to avoid getting any debris on you or your vehicle.
What you need
Step 1
Cabin Air Filter
- Open the passenger side door and open the glove box.
- Remove any contents inside of the glove box.
Open the passenger side door and open the glove box.
Remove any contents inside of the glove box.
1024
Step 2
- Using a Phillips #1 screwdriver, remove the 15 mm screw securing the dampener rod to the right of the glove box.
Using a Phillips #1 screwdriver, remove the 15 mm screw securing the dampener rod to the right of the glove box.
Step 3
- Unhook the dampener rod from the glove box.
Unhook the dampener rod from the glove box.
Step 4
- Remove the glove box by squeezing inwards on the sides of it then pulling it straight out.
Remove the glove box by squeezing inwards on the sides of it then pulling it straight out.
Step 5
- Squeeze inward on the left and right tabs of the air filter cover.
- Pull the cover off slowly.
- Gently remove the old air filter to avoid dropping debris over the car floor.
Squeeze inward on the left and right tabs of the air filter cover.
Pull the cover off slowly.
Gently remove the old air filter to avoid dropping debris over the car floor.
Step 6
- Align a new air filter with the airflow direction arrow pointing downwards.
- Slide the new filter into place.
Align a new air filter with the airflow direction arrow pointing downwards.
Slide the new filter into place.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
Joshua Maitoza
Member since: 03/22/2021
189 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
UMass Dartmouth, Team S1-G14, Riel Spring 2021
Member of UMass Dartmouth, Team S1-G14, Riel Spring 2021
UMASSD-RIEL-S21S1G14
1 Member
1 Guide authored
