Difficulty

Easy

Steps

6

Time Required

                          5 - 10 minutes

Sections

1

  • Windshield Wiper
  • 6 steps

Flags

0

  • Back2002-2006 Acura Integra

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

To begin this guide, all that is needed is a towel or piece of cloth, a measuring tape, and new windshield wipers. Don’t know what windshield wipers to get ? Don’t worry, in this guide I’ve included some steps to help you choose your new windshield wipers.

Before beginning, power off the ignition and engage the parking brake.

What you need

Step 1

              Windshield Wiper
  • Use the tape measure to measure the length of the wiper blades from top to bottom.
  • This will help you determine the correct size of replacement wipers that you will need.

Use the tape measure to measure the length of the wiper blades from top to bottom.

This will help you determine the correct size of replacement wipers that you will need.

1024

Step 2

  • Lift the windshield wiper off the windshield.
  • Place a towel underneath the wiper to prevent damage to the windshield if the wiper is dropped.
  • Avoid lifting the windshield wiper too far back; doing so can cause damage to what helps the wiper stay against the windshield.

Lift the windshield wiper off the windshield.

Place a towel underneath the wiper to prevent damage to the windshield if the wiper is dropped.

Avoid lifting the windshield wiper too far back; doing so can cause damage to what helps the wiper stay against the windshield.

Step 3

  • Lift open the clip above the wiper with one hand while holding the wiper arm up with the other.
  • Opening this clip will allow us to slide the wiper off for the next step.

Lift open the clip above the wiper with one hand while holding the wiper arm up with the other.

Opening this clip will allow us to slide the wiper off for the next step.

Step 4

  • Grab the wiper with one hand while holding the wiper arm up with the other.
  • Slide the wiper down.
  • Once unhooked, pull the wiper back and away from the wiper arm to remove the wiper.

Grab the wiper with one hand while holding the wiper arm up with the other.

Slide the wiper down.

Once unhooked, pull the wiper back and away from the wiper arm to remove the wiper.

Step 5

  • Place the replacement wiper against the wiper arm with the hooking mechanism facing the hook of the wiper arm.
  • Slide the wiper up, thus putting it into place.

Place the replacement wiper against the wiper arm with the hooking mechanism facing the hook of the wiper arm.

Slide the wiper up, thus putting it into place.

Step 6

  • Once the wiper is slid up all the way, grab the top clip of the wiper.
  • Close the clip until a click is heard.
  • Remove the towel and lower the wiper arm down gently.

Once the wiper is slid up all the way, grab the top clip of the wiper.

Close the clip until a click is heard.

Remove the towel and lower the wiper arm down gently.

Follow these instructions for the second windshield wiper.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Brian Gonzalez

Member since: 12/05/2022

133 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       CSU Los Angeles, Team 3-11, Briggs Fall 2022                        

                                                  Member of CSU Los Angeles, Team 3-11, Briggs Fall 2022 



                    CSULA-BRIGGS-F22S3G11                     


                                            1 Member                     


                                            1 Guide authored