Difficulty
Moderate
Steps
5
Time Required
5 - 10 minutes
Sections
1
- 2002-2007 Jeep Liberty Rear Indicator Light
- 5 steps
Flags
0
Back2002-2007 Jeep Liberty
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
2002-2007 Jeep Liberty Rear Indicator Light
- Open the vehicle’s rear door to access the tail light assembly.
Open the vehicle’s rear door to access the tail light assembly.
1024
Step 2
- Use the T-20 Torx screwdriver to unscrew the two screws holding the tail light cover.
Use the T-20 Torx screwdriver to unscrew the two screws holding the tail light cover.
Step 3
- Remove cover by pulling out and away from car.
- The cover is fastened with two plastic alignment pins.
Remove cover by pulling out and away from car.
The cover is fastened with two plastic alignment pins.
Step 4
- Twist the middle socket counter-clockwise.
- Pull the socket out of the tail light assembly to access bulb.
Twist the middle socket counter-clockwise.
Pull the socket out of the tail light assembly to access bulb.
Step 5
- Grasp the lightbulb and pull it out of the socket.
Grasp the lightbulb and pull it out of the socket.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Madison Brown
Member since: 03/30/2020
145 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
University of Memphis, Team S5-G21, Willis Spring 2020
Member of University of Memphis, Team S5-G21, Willis Spring 2020
UM-WILLIS-S20S5G21
1 Member
1 Guide authored
