Difficulty
Easy
Steps
6
Time Required
5 minutes
Sections
1
- Cabin Air Filter
- 6 steps
Flags
0
Back2003-2007 Honda Accord
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Cabin Air Filter
- Open the passenger side door and locate the glove box. Open and empty the glove box.
Open the passenger side door and locate the glove box. Open and empty the glove box.
1024
Step 2
- Identify the glove box damper assy latch on the right side of the glove box. Using moderate force, press against the latch with your thumb until it pops out of place.
Identify the glove box damper assy latch on the right side of the glove box. Using moderate force, press against the latch with your thumb until it pops out of place.
Step 3
- The glove box is held in place by tabs on both sides. Push inward on both sides of the box to allow the glove box to drop clear the tabs and drop downward slowly.
The glove box is held in place by tabs on both sides. Push inward on both sides of the box to allow the glove box to drop clear the tabs and drop downward slowly.
Step 4
- Now that the cabin air filter housing is visible locate the locking tabs on the left and right edges.
- Push the tabs inward and gently shake the housing free while pulling straight out.
- When reassembling, push the filter tray in gently until both locking tabs click into position. The filter must be inserted into the tray fully for the tray to fit back in.
Now that the cabin air filter housing is visible locate the locking tabs on the left and right edges.
Push the tabs inward and gently shake the housing free while pulling straight out.
When reassembling, push the filter tray in gently until both locking tabs click into position. The filter must be inserted into the tray fully for the tray to fit back in.
Step 5
- Push the air filter out of the plastic housing from the bottom and discard.
Push the air filter out of the plastic housing from the bottom and discard.
Step 6
- Orient the new filter properly, with the air flow arrows (located on the filter) aligning with the indication on the filter tray assy.
- Press the air filter down into the housing while draping the filter’s thick side pleats into the plastic housing.
- Ensure that the last vanes on the front and back of the filter fit into the retaining tabs in the filter tray to prevent any particulates passing around the filter.
Orient the new filter properly, with the air flow arrows (located on the filter) aligning with the indication on the filter tray assy.
Press the air filter down into the housing while draping the filter’s thick side pleats into the plastic housing.
Ensure that the last vanes on the front and back of the filter fit into the retaining tabs in the filter tray to prevent any particulates passing around the filter.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
21 other people completed this guide.
Author
with 6 other contributors
Shaun MacDonald
Member since: 10/03/2012
2,433 Reputation
8 Guides authored
Badges:
15
+12 more badges
Team
Cal Poly, Team 24-27, Regan Fall 2012
Member of Cal Poly, Team 24-27, Regan Fall 2012
CPSU-REGAN-F12S24G27
4 Members
21 Guides authored
raysanchez120 - Jun 27, 2020
Reply
Good easy to understand directions and removal of cabin air filter . Thank You
