Difficulty
Moderate
Steps
7
Time Required
30 minutes
Sections
1
- Cabin Air Filter
- 7 steps
Flags
0
Back2005-2011 Volkswagen Jetta
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Cabin Air Filter
- Open the passenger door
Open the passenger door
1024
Step 2
- Once the door is open locate the blower motor housing, which will be located below the glove compartment and behind the black foam cover.
Once the door is open locate the blower motor housing, which will be located below the glove compartment and behind the black foam cover.
Step 3
- Using a flat-head screw driver, remove the 2 screws on the foam cover by screwing counter clockwise. Store the screws in a safe place.
Using a flat-head screw driver, remove the 2 screws on the foam cover by screwing counter clockwise. Store the screws in a safe place.
Step 4
- Remove the foam cover.
Remove the foam cover.
Step 5
- Pinch the cover and move it to the right, then pull the cover to remove it.
Pinch the cover and move it to the right, then pull the cover to remove it.
Step 6
- Pull out the dirty/old cabin air filter.
Pull out the dirty/old cabin air filter.
Step 7
- Depending on the condition of the filter you can either vacuum or replace with new filter. Vacuum dirty filter or remove packaging on new filter.
Depending on the condition of the filter you can either vacuum or replace with new filter. Vacuum dirty filter or remove packaging on new filter.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Ann Casseus
Member since: 09/19/2022
175 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
University of Memphis, Team 2-1, Cameron Fall 2022
Member of University of Memphis, Team 2-1, Cameron Fall 2022
UM-CAMERON-F22S2G1
3 Members
1 Guide authored
