2005 2015 Nissan Xterra Fuel Pump Replacement 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Flags

Back2005-2015 Nissan Xterra
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Follow this video tutorial by YouTuber Ry The Car Guy to complete the replacement yourself.

If this is your first time working on a vehicle read our safety tips before proceeding.

What you need

Video Instructions

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                    eCuration

Member since: 05/19/2017

101 Reputation

                                      233 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

David N Bobbitt - Oct 20, 2017

I own a 2010 nissan xterra and I would like to see where the fuel check valve is located. I’m having trouble with the car not starting when it’s cold. However, if I let the truck sit with key in the on position like you did to prime the pump, it starts right up. I’ve found info about a vapor canister check valve but I’m not 100% sure my model has sush a part. Great video, and will be referencing you for future projects.

joshuacay - Apr 28, 2018

its the fuel pump, I am doing mine today, the check valve is inside the stupid pump

desertengineer1 - Jul 26, 2022

Howdy. Former Air Force Maintenance guy here. Had to do this on the previous generation where it was under the seat and SO much easier. But, I have a safety recommendation for you all on this. Using a tiny tube, siphon as much gas out as you can. Then, however your preference, get a hair dryer, TURN OFF THE HEAT. OPEN ALL GARAGE DOORS TO THE OUTSIDE, or just BE outside. Now pump as much fresh air volume into the tank continuously for several hours, or for a day for good measure. Fuel pump opening is probably best for volume. This will evaporate out all volatiles and even any water that may have collected in the sump. You now have a fully safe tank to work with, and can easily wipe out that nasty orange grunge for a really clean, like new tank. This is how we make BIG plane tanks safe to crawl into. Only took a couple of hours with full airflow for mine to be completely safe to work with.

1024

Introduction#

What you need#

Video Instructions#

#

#

Introduction

What you need

Video Instructions