Difficulty
Easy
Steps
5
Time Required
10 minutes
Sections
1
- Cabin Air Filter
- 5 steps
Flags
0
Back2003-2007 Honda Accord
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Be gentle with the glove box damper arm latch, replacing a broken one is a major job (involves removing the dashboard)!
What you need
Step 1
Open the glove box
- Locate the glove compartment on the passenger side of the vehicle.
- Unlatch the glove compartment and allow it to fully open.
Locate the glove compartment on the passenger side of the vehicle.
Unlatch the glove compartment and allow it to fully open.
1024
Step 2
Unhook the glove box damper arm latch
- Locate the glove box damper assy latch on the right side of the glove compartment.
- Unhook the latch from the glove compartment by pushing it towards the front of the car.
Locate the glove box damper assy latch on the right side of the glove compartment.
Unhook the latch from the glove compartment by pushing it towards the front of the car.
Step 3
Release the glove box stops
- Firmly grab both sides of the glove compartment.
- Push the sides of the glove compartment inward and drop the entire glove box down to release it from the dashboard. Support the glove box with your leg.
Firmly grab both sides of the glove compartment.
Push the sides of the glove compartment inward and drop the entire glove box down to release it from the dashboard. Support the glove box with your leg.
Step 4
Remove the cabin air filter tray
- Locate the cover for the cabin air filter and notice the two tabs on either side.
- Press on both tabs of the cover and pull the cover outwards towards you to reveal the cabin air filter.
- Pull the cover all the way out.
Locate the cover for the cabin air filter and notice the two tabs on either side.
Press on both tabs of the cover and pull the cover outwards towards you to reveal the cabin air filter.
Pull the cover all the way out.
Step 5
Remove and replace the cabin air filter
- Pull the air filter out of the cover.
- When putting in the new filter, be sure to line up the air flow arrows on the filter with the arrows on the front of the cover.
Pull the air filter out of the cover.
When putting in the new filter, be sure to line up the air flow arrows on the filter with the arrows on the front of the cover.
Reinstall the cabin air filter tray, and reinstall the glove box in reverse order as the earlier steps.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 7 other contributors
Frank
Member since: 04/14/2014
267 Reputation
2 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 12-35, Maness Spring 2014
Member of Cal Poly, Team 12-35, Maness Spring 2014
CPSU-MANESS-S14S12G35
4 Members
5 Guides authored