Difficulty

Easy

Steps

7

Time Required

                          15 - 25 minutes

Sections

1

  • Headlight Bulb
  • 7 steps

Flags

0

  • Back2005 Honda CBR600RR

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

This guide provides all the necessary steps for anyone looking to perform this particular fix or something similar.

NOTE: Do not perform the procedure with the bike on.

What you need

Step 1

              Headlight Bulb
  • Turn off the bike before beginning.
  • Remove the bike seat by grabbing both ends and pulling the seat toward the rear wheel.
  • Locate the screw on the battery.

Turn off the bike before beginning.

Remove the bike seat by grabbing both ends and pulling the seat toward the rear wheel.

Locate the screw on the battery.

1024

Step 2

  • Use a Phillips #0 screwdriver to remove the single screw, disconnecting the power to the battery.

Use a Phillips #0 screwdriver to remove the single screw, disconnecting the power to the battery.

Step 3

  • Pull the bulb’s plug directly out of its port.

Pull the bulb’s plug directly out of its port.

Step 4

  • Remove the outer rubber boot by pulling it towards yourself.

Remove the outer rubber boot by pulling it towards yourself.

Step 5

  • While pushing down on the silver pin, pull the bulb directly out of its socket without turning.

While pushing down on the silver pin, pull the bulb directly out of its socket without turning.

Step 6

  • Wear latex or nitrile gloves when handling the new bulb.
  • Insert the new bulb into the empty socket and secure it by gently pushing it into place until properly seated.

Wear latex or nitrile gloves when handling the new bulb.

Insert the new bulb into the empty socket and secure it by gently pushing it into place until properly seated.

Step 7

  • Repeat the steps in reverse order to reassemble the bike, and turn it on to check if the headlight works.

Repeat the steps in reverse order to reassemble the bike, and turn it on to check if the headlight works.

Enjoy your bright new headlight!

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Rai Bhatti

Member since: 07/05/2022

145 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       York University, Team M-2, Allen Summer 2022                        

                                                  Member of York University, Team M-2, Allen Summer 2022 



                    YORK-ALLEN-SU22SMG2                     


                                            1 Member                     


                                            1 Guide authored