2005 Jeep Liberty Fog Light Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          30 minutes

Sections

Fog Light
9 steps

Flags

Back2002-2007 Jeep Liberty
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Fog Light

Open the hood to access the radiator grill tabs.
Pull up on the first tab and repeat for the remaining four tabs.

Open the hood to access the radiator grill tabs.

Pull up on the first tab and repeat for the remaining four tabs.

1024

Step 2

Tilt the radiator grill cover forward and lift up and out to remove.

Tilt the radiator grill cover forward and lift up and out to remove.

Step 3

Using an allen wrench, turn the tension screw counter-clockwise to loosen the light housing.

Using an allen wrench, turn the tension screw counter-clockwise to loosen the light housing.

Step 4

Lift up on the tension screw to release the light housing.

Lift up on the tension screw to release the light housing.

Step 5

Using a flat-head screwdriver, pull the tab outward to remove the light housing.
Repeat the procedure for the right side of the light housing.

Using a flat-head screwdriver, pull the tab outward to remove the light housing.

Repeat the procedure for the right side of the light housing.

Step 6

Pull the light housing toward you.

Pull the light housing toward you.

Step 7

Remove the wiring harness from the light socket by lifting up on the tab with a flat-head screwdriver.

Remove the wiring harness from the light socket by lifting up on the tab with a flat-head screwdriver.

Step 8

Remove the light socket from the light housing by turning counter-clockwise.

Remove the light socket from the light housing by turning counter-clockwise.

Step 9

Remove the light socket from the light housing and replace.
The light socket part number is 9145 and can be purchased at any auto parts store.
Install the new light socket back into the light housing by turning clockwise.
Plug the wiring harness back in the light socket.

Remove the light socket from the light housing and replace.

The light socket part number is 9145 and can be purchased at any auto parts store.

Install the new light socket back into the light housing by turning clockwise.

Plug the wiring harness back in the light socket.

Test the replacement light socket by turning the lights on. If working, reinstall the light housing and radiator grill cover.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    CHARLES CATLEDGE

Member since: 09/17/2017

161 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Pasco Hernando, Team S4-G55, Prince Winter 2017                        

                                                  Member of Pasco Hernando, Team S4-G55, Prince Winter 2017 



                    PHSC-PRINCE-W17S4G55                     


                                            1 Member                     


                                            1 Guide authored

vievie aryanti - Oct 25, 2019

Thank you for your information, if you are looking for a place that sells the best and most trusted car fog lamps. Check this out!

Sydney Ballard - Oct 9, 2020

Thank was easy

Introduction#

What you need#

Team#

Introduction

What you need

Team