Difficulty
Very easy
Steps
4
Time Required
10 minutes
Sections
1
- Dome Light
- 4 steps
Flags
0
Back2006-2011 Honda Civic
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Dome lights are helpful when entering and exiting your vehicle. Without it, it may be challenging to see at night.
Before using this guide, make sure the old bulb is not loose. On some rare occasions, the bulb can come loose, causing the light not to work.
While following this guide, you must be gentle with the replacement bulb to avoid any damage. Also, handle the plastic dome light cover with care.
There are no special skills required to complete this replacement guide.
What you need
Step 1
Dome Light
- Turn on the dome light by pressing the light.
- Press in once again, but do not release.
- Insert a screwdriver or plier into the lifted side of the cover and gently push down.
Turn on the dome light by pressing the light.
Press in once again, but do not release.
Insert a screwdriver or plier into the lifted side of the cover and gently push down.
1024
Step 2
- Remove the bulb by using a flathead screwdriver and gently push down on any side of the bulb.
Remove the bulb by using a flathead screwdriver and gently push down on any side of the bulb.
Step 3
- Place your replacement bulb in the center of the two clips and gently push it into place.
Place your replacement bulb in the center of the two clips and gently push it into place.
Step 4
- Insert one side of the cover into its slot.
- Gently snap the cover into place.
Insert one side of the cover into its slot.
Gently snap the cover into place.
To reassemble your device, please follow step 4.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Allan
Member since: 10/26/2022
159 Reputation
1 Guide authored
Badges:
3
Team
CSU Los Angeles, Team 3-7, Briggs Fall 2022
Member of CSU Los Angeles, Team 3-7, Briggs Fall 2022
CSULA-BRIGGS-F22S3G7
1 Member
1 Guide authored