2006 2011 Honda Civic Key Fob Battery Replacement 2006 2007 2008 2009 2010 2011 Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          5 - 10 minutes            

Sections

1

• Key FOB Battery
• 6 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

• Back2006-2011 Honda Civic

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Key FOB Battery               

• Using the Phillips #0 screwdriver, remove the single screw from the bottom of the key FOB.

Using the Phillips #0 screwdriver, remove the single screw from the bottom of the key FOB.

1024

Step 2

• Gently lift the outer shell and remove it from the rest of the device.
• Be careful not to break the clip located at the hole for the key ring that holds the shell in place.

Gently lift the outer shell and remove it from the rest of the device.

Be careful not to break the clip located at the hole for the key ring that holds the shell in place.

Step 3

• Remove the inner shell from the outer shell by pushing the buttons to loosen the inner shell.

Remove the inner shell from the outer shell by pushing the buttons to loosen the inner shell.

Step 4

• Unclasp the inner shell using the clips on the top and bottom.
• Careful as to not break the clips as it keeps moisture, dust, and dirt from entering the delicate electronics.

Unclasp the inner shell using the clips on the top and bottom.

Careful as to not break the clips as it keeps moisture, dust, and dirt from entering the delicate electronics.

Step 5

• Remove the battery inside of the inner shell of the key FOB.
• If the battery is corroded, make sure to wear gloves due to battery acid.
• Do not puncture the battery when removing the old one/placing a new one.

Remove the battery inside of the inner shell of the key FOB.

If the battery is corroded, make sure to wear gloves due to battery acid.

Do not puncture the battery when removing the old one/placing a new one.

Step 6

• Replace the old battery with a new one.

Replace the old battery with a new one.

To reassemble your key FOB, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Erika Caushi                     

Member since: 03/22/2021

142 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       UMass Dartmouth, Team S1-G6, Riel Spring 2021                        

                                                  Member of UMass Dartmouth, Team S1-G6, Riel Spring 2021 



                    UMASSD-RIEL-S21S1G6                     


                                            1 Member                     


                                            4 Guides authored