Difficulty
Easy
Steps
10
Time Required
30 - 35 minutes
Sections
1
- Weatherproofing Car Window
- 10 steps
Flags
0
Back2006 (convertible) Ford Mustang
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Weatherproofing Car Window
- Driver side weatherproofing car window.
Driver side weatherproofing car window.
1024
Step 2
- Locate the both ends of the weather stripping.
Locate the both ends of the weather stripping.
Step 3
- Pull down the weather stripping from the middle.
Pull down the weather stripping from the middle.
Step 4
- In each side of the weather stripping, you will find one plastic nail.
- Take off these two plastic nails with your hand.
In each side of the weather stripping, you will find one plastic nail.
Take off these two plastic nails with your hand.
Step 5
- Remove the old weather stripping.
Remove the old weather stripping.
Step 6
- Clean any dust from where you took out the old weather stripping.
Clean any dust from where you took out the old weather stripping.
Step 7
- Bring the new weather stripping.
Bring the new weather stripping.
Step 8
- Starting from both sides, push the two plastic nails into the holes.
Starting from both sides, push the two plastic nails into the holes.
Step 9
- Push the weather stripping from the middle with your fingers.
Push the weather stripping from the middle with your fingers.
Step 10
- Make sure it is aligned.
Make sure it is aligned.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Abdelaziz Alqisy
Member since: 09/25/2018
181 Reputation
1 Guide authored
Badges:
3
Team
Eastern Washington University, Team S3-G4, Crane Fall 2018
Member of Eastern Washington University, Team S3-G4, Crane Fall 2018
EWU-CRANE-F18S3G4
4 Members
4 Guides authored