Difficulty
Easy
Steps
9
Time Required
10 - 20 minutes
Sections
2
- How to access the 2006 Honda Shadow Spirit 750 toolbox
- 2 steps
- Battery
- 7 steps
Flags
0
Back2006 Honda Shadow Spirit 750
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
NOTE: The directions in the guide refer to the view from the back of the motorbike.
Left = The side opposite the tail pipe
Right = The side with the tail pipe
What you need
Step 1
Remove outer casing
- Remove the plastic covering, located on the left side of the bike, by pulling the piece straight off the bike.
Remove the plastic covering, located on the left side of the bike, by pulling the piece straight off the bike.
1024
Step 2
Open toolbox
- The tool box is located under the panel.
- Using the key to the motorbike, unlock the tool box.
- Remove the plastic bag inside holding the tools needed for basic maintenance for the motorbike.
The tool box is located under the panel.
Using the key to the motorbike, unlock the tool box.
Remove the plastic bag inside holding the tools needed for basic maintenance for the motorbike.
Step 3
Unscrew the seat
- Using the allen wrench, remove the screws on both sides of the bike seat.
Using the allen wrench, remove the screws on both sides of the bike seat.
Step 4
Remove the seat
- Pull the rear of the seat upwards.
- Pull the seat backwards to remove it from the bike.
Pull the rear of the seat upwards.
Pull the seat backwards to remove it from the bike.
Step 5
Remove plastic covering
- Using the screwdriver, remove the screw holding the plastic cover.
Using the screwdriver, remove the screw holding the plastic cover.
Step 6
Remove the fusebox
- Pull the cover off the battery and remove the fuse box from the cover.
- Place the fuse box over to the side right of the bike. Do not disconnect the wires.
Pull the cover off the battery and remove the fuse box from the cover.
Place the fuse box over to the side right of the bike. Do not disconnect the wires.
Step 7
Detach the ground wire
- Using the screwdriver, remove the ground wire (negative (-) cable) from the battery.
- Place the wire over the left side of the bike.
Using the screwdriver, remove the ground wire (negative (-) cable) from the battery.
Place the wire over the left side of the bike.
Step 8
Detach the power cable
- Also using the screwdriver, remove the positive (+) cable from the battery.
- Place the wire over the right side of the bike.
- Do not let the red(+) and black(-) wires touch
Also using the screwdriver, remove the positive (+) cable from the battery.
Place the wire over the right side of the bike.
Do not let the red(+) and black(-) wires touch
Step 9
Remove the battery
- Remove the battery from the bike by pulling upwards.
Remove the battery from the bike by pulling upwards.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
9 other people completed this guide.
Author
with 1 other contributor
Dazarene Cascio
Member since: 10/07/2014
736 Reputation
2 Guides authored
Badges:
14
+11 more badges
Team
USF Tampa, Team 1-7, Donnelly Fall 2014
Member of USF Tampa, Team 1-7, Donnelly Fall 2014
USFT-DONNELLY-F14S1G7
1 Member
2 Guides authored
