Difficulty
Moderate
Steps
3
Time Required
Suggest a time??
Sections
1
- Replace Dome Lights
- 3 steps
Flags
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Needs More Images
A few more images would make this guide’s procedures crystal clear.
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Back2007-2010 Jeep Compass
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
This guide shows you how you can do it without breaking anything.
What you need
Step 1
Replace Dome Lights
- Take screwdriver and place the flat screwdriver head into the slot.
- Press both inward and down until the dome cover comes loose
- Remove dome and set aside
Take screwdriver and place the flat screwdriver head into the slot.
Press both inward and down until the dome cover comes loose
Remove dome and set aside
1024
Step 2
- Remove bulbs
- Insert new bulbs
- If bulb doesnt turn on, try putting it in facing the other direction
Remove bulbs
Insert new bulbs
If bulb doesnt turn on, try putting it in facing the other direction
Step 3
- Replace dome cover by placing the right side of the cover over the plastic clip and inserting the left side tab into the slot.
Replace dome cover by placing the right side of the cover over the plastic clip and inserting the left side tab into the slot.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Nathan Roy
Member since: 09/23/2016
97 Reputation
1 Guide authored
Badges:
2
