2007 2011 Toyota Camry Headlight Bulb Replacement 2007 2008 2009 2010 2011 Repair Guide

Difficulty

Easy

Steps

Time Required

                          30 minutes

Sections

Headlight Bulb
6 steps

Flags

Back2007-2011 Toyota Camry
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Driving with one or both headlights not being functional could lead to accidents on the road. That is why cops pull people over for this very reason.

This guide will provide steps on how to replace these used up or burnt-out headlight bulbs. All you need is your hands and the right bulbs to get the job done.

Step 1

              Headlight Bulb

Pop up the hood of the car.

Pop up the hood of the car.

1024

Step 2

Locate the headlight bulb on the inside of the hood and hold onto the bulb.
The other headlight bulb is in the same area on the other side of the car.

Locate the headlight bulb on the inside of the hood and hold onto the bulb.

The other headlight bulb is in the same area on the other side of the car.

Step 3

Turn counterclockwise (1/4 of a turn) to remove the bulb and its attached plug from the socket.
This step is applied for both headlight bulbs.

Turn counterclockwise (1/4 of a turn) to remove the bulb and its attached plug from the socket.

This step is applied for both headlight bulbs.

Step 4

Hold onto the bulb with one hand while holding down the clip at the bottom of the plug to remove the bulb.

Hold onto the bulb with one hand while holding down the clip at the bottom of the plug to remove the bulb.

Step 5

Remove the new bulb from its package.
Make sure to not touch the glass part with your hands. This can cause a hot spot on the bulb, making it burn out faster. Wipe the bulb with a paper towel if contact was made.

Remove the new bulb from its package.

Make sure to not touch the glass part with your hands. This can cause a hot spot on the bulb, making it burn out faster. Wipe the bulb with a paper towel if contact was made.

Step 6

Place the bulb back into the plug and press down until it click into place.
The bulb only goes in one way. Make sure the plug and the bulb are facing the same direction.

Place the bulb back into the plug and press down until it click into place.

The bulb only goes in one way. Make sure the plug and the bulb are facing the same direction.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor

                    Phuc Nguyen

Member since: 03/31/2020

187 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       University of Memphis, Team S4-G4, Willis Spring 2020                        

                                                  Member of University of Memphis, Team S4-G4, Willis Spring 2020 



                    UM-WILLIS-S20S4G4                     


                                            1 Member                     


                                            1 Guide authored

Introduction#

Team#

Introduction

Team