Difficulty
Easy
Steps
3
Time Required
5 - 10 minutes
Sections
1
- Key Fob Battery
- 3 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackNissan Altima
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Key Fob Battery
- Slide the switch on the back of the key fob and release the physical car key that is stored inside.
Slide the switch on the back of the key fob and release the physical car key that is stored inside.
1024
Step 2
- Insert the small flathead screwdriver into the small notch on the left side of the key fob and carefully pry apart.
Insert the small flathead screwdriver into the small notch on the left side of the key fob and carefully pry apart.
Step 3
- Pry out the old CR2032 3V battery with the flathead screwdriver.
- Don’t insert the screwdriver near the metal battery contacts so as to avoid damaging them.
Pry out the old CR2032 3V battery with the flathead screwdriver.
Don’t insert the screwdriver near the metal battery contacts so as to avoid damaging them.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Johnrich Mbwambo
Member since: 03/22/2021
97 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
UMass Dartmouth, Team S2-G9, Riel Spring 2021
Member of UMass Dartmouth, Team S2-G9, Riel Spring 2021
UMASSD-RIEL-S21S2G9
1 Member
1 Guide authored
