Difficulty
Easy
Steps
5
Time Required
5 - 20 minutes
Sections
1
- Tail Light
- 5 steps
Flags
0
Back2003-2007 Honda Accord
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Before using this guide, check the light to make sure that it isn’t just loose in the socket. A loose bulb can prevent the light from projecting when stepping on the brake pedal. The bulb may be blown out as a cause of the tail light not working so it is essential that you check the bulb to see what the cause is before replacing it.
Be sure to power off the ignition and engage the parking brake before you begin.
What you need
Step 1
Tail Light
- Open the trunk.
- Remove the two screws from the tail light area in the trunk using a Torx screwdriver.
Open the trunk.
Remove the two screws from the tail light area in the trunk using a Torx screwdriver.
1024
Step 2
- Pull back the trunk covering.
Pull back the trunk covering.
Step 3
- Pull on the gray plastic part of the tail light assembly to remove it from the car.
Pull on the gray plastic part of the tail light assembly to remove it from the car.
Step 4
- Unscrew the bulb from its socket and replace it with a new one.
Unscrew the bulb from its socket and replace it with a new one.
Step 5
- Put the tail light assembly back in the car.
- Replace the trunk covering.
- Screw the trunk covering screws back in place using a Torx screwdriver.
Put the tail light assembly back in the car.
Replace the trunk covering.
Screw the trunk covering screws back in place using a Torx screwdriver.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Darien Howard
Member since: 02/14/2021
121 Reputation
1 Guide authored
Badges:
2
Team
Texas Tech, Team S3-G8, Cowan Spring 2021
Member of Texas Tech, Team S3-G8, Cowan Spring 2021
TTU-COWAN-S21S3G8
1 Member
1 Guide authored
