Difficulty

Easy

Steps

8

Time Required

                          10 minutes

Sections

1

  • air filter
  • 8 steps

Flags

3

Grammar Police

Embrace your inner English teacher and help improve this guide’s grammar!

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • Back2007 Toyota Avalon

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              How to access
  • To access the air filter you must open the glove box and use a Philips head screwdriver to remove the screw attached to the dampener arm on the right side.

To access the air filter you must open the glove box and use a Philips head screwdriver to remove the screw attached to the dampener arm on the right side.

1024

Step 2

              access
  • Unhook the dampener arm.

Unhook the dampener arm.

Step 3

              Access
  • Push in the sides of the glove box to release the stops and to lower the glove box.

Push in the sides of the glove box to release the stops and to lower the glove box.

Step 4

              Access
  • Unclip both sides of the housing cover in order and remove it.

Unclip both sides of the housing cover in order and remove it.

Step 5

              Removal
  • Remove the old filter and clean any debris inside.

Remove the old filter and clean any debris inside.

Step 6

              Replacement
  • Install the new CAF1816P filter into the housing. Note: The arrow should point downwards indicating the direction of the airflow.

Install the new CAF1816P filter into the housing. Note: The arrow should point downwards indicating the direction of the airflow.

Step 7

              Reassemble
  • Reinstall the housing cover and the glove box assembly.

Reinstall the housing cover and the glove box assembly.

Step 8

              Reassemble
  • Reattach the dampener arm with Phillips head screw to the glove box and close it well.

Reattach the dampener arm with Phillips head screw to the glove box and close it well.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Johnny Holloway

Member since: 06/22/2021

157 Reputation

                                      1 Guide authored                  



                       Badges:
                       1