Difficulty
Easy
Steps
5
Time Required
10 minutes
Sections
1
- Windshield Wipers
- 5 steps
Flags
0
Back2007-2012 Jeep Wrangler (JK)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Windshield Wipers
- Measure the length of the wiper blade using the measuring tape to determine the length of your replacement blades.
- In this case, it’s 15 inches.
- Place the cloth underneath both wiper blades to protect the windshield.
Measure the length of the wiper blade using the measuring tape to determine the length of your replacement blades.
In this case, it’s 15 inches.
Place the cloth underneath both wiper blades to protect the windshield.
1024
Step 2
- Pick up the blade.
- Press down on the small white clip holding the arm connected to the car.
Pick up the blade.
Press down on the small white clip holding the arm connected to the car.
Step 3
- Once the blade is unhooked, tilt the blade and pull it downwards.
- Detach the blade from the windshield arm.
Once the blade is unhooked, tilt the blade and pull it downwards.
Detach the blade from the windshield arm.
Step 4
- Rotate the clip on the replacement blade to the right as shown in the picture.
- Slide the hook of the arm in between the blades.
Rotate the clip on the replacement blade to the right as shown in the picture.
Slide the hook of the arm in between the blades.
Step 5
- Snap it into place and make sure it’s secure.
- Repeat this process for the other windshield wiper.
Snap it into place and make sure it’s secure.
Repeat this process for the other windshield wiper.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Jacqueline German
Member since: 08/22/2022
121 Reputation
1 Guide authored
Badges:
2
Team
CSU Los Angeles, Team 1-25, Briggs Fall 2022
Member of CSU Los Angeles, Team 1-25, Briggs Fall 2022
CSULA-BRIGGS-F22S1G25
1 Member
1 Guide authored