Difficulty

Moderate

Steps

7

Time Required

                          30 - 40 minutes

Sections

1

  • Radio
  • 7 steps

Flags

5

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • Back2005-2011 Volkswagen Jetta

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Radio
  • Starting from the back of the top panel, pry open the top panel with a panel tool.
  • Remove the top panel exposing the under.
  • Be careful when removing the layers as they have very delicate clips holding them together.

Starting from the back of the top panel, pry open the top panel with a panel tool.

Remove the top panel exposing the under.

Be careful when removing the layers as they have very delicate clips holding them together.

1024

Step 2

  • Use the T20 Torx screwdriver to remove the single screw.
  • After screw is removed, pull out the cover.

Use the T20 Torx screwdriver to remove the single screw.

After screw is removed, pull out the cover.

Step 3

  • Within the third layer, remove two more screws using the T20 Torx Screwdriver.
  • Use the panel tool to unclip the three clips on the back then remove the 3rd panel.

Within the third layer, remove two more screws using the T20 Torx Screwdriver.

Use the panel tool to unclip the three clips on the back then remove the 3rd panel.

Step 4

  • Use the panel tool and slowly loosen up the outer shell by following the crevice outline.
  • Once loosened up remove the upper face layer.
  • When removing this layer there will be a wire connecting the passenger air bag light. Leave that wire alone and carefully place the layer on the dashboard.

Use the panel tool and slowly loosen up the outer shell by following the crevice outline.

Once loosened up remove the upper face layer.

When removing this layer there will be a wire connecting the passenger air bag light. Leave that wire alone and carefully place the layer on the dashboard.

Step 5

  • Remove the two screws using the T20 Torx Screwdriver.
  • Use the panel tool once again to carefully open up the crevices on the bottom cover. Remove the layer.

Remove the two screws using the T20 Torx Screwdriver.

Use the panel tool once again to carefully open up the crevices on the bottom cover. Remove the layer.

Step 6

  • Use the T20 Torx remove the four screws placing the radio in place.
  • Once the screws are removed carefully pull out the radio to reveal the wires connected on the back.

Use the T20 Torx remove the four screws placing the radio in place.

Once the screws are removed carefully pull out the radio to reveal the wires connected on the back.

Step 7

  • There will be two clipped wires on the back of he radio.
  • Push the clips in on the black wires connected to loosen them up and carefully pull out the wire.
  • The second bunch of wires will only require a flip of the lever down on the bottom of the black outer box. Once flipped up remove the whole box to free the radio.

There will be two clipped wires on the back of he radio.

Push the clips in on the black wires connected to loosen them up and carefully pull out the wire.

The second bunch of wires will only require a flip of the lever down on the bottom of the black outer box. Once flipped up remove the whole box to free the radio.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Juan Saldivar

Member since: 03/21/2021

157 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Grand Valley State University, Team S3-G22, DeVasto Winter 2021                        

                                                  Member of Grand Valley State University, Team S3-G22, DeVasto Winter 2021 



                    GVSU-DEVASTO-W21S3G22                     


                                            1 Member                     


                                            1 Guide authored