2009 2013 Toyota Matrix Auxilary Port Replacement 2009 2010 2011 2012 2013 Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          10 minutes            

Sections

1

• Auxilary Port
• 4 steps

Flags

3

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• Back2009-2014 Toyota Matrix

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Step 1

              Cup Holders               

• Open the glove box
• Pry up on the cup holders on the front of the glove box. You can do this with your fingers
• Un-clip and pull up on the cup holders, freeing the parking brake in the process

Open the glove box

Pry up on the cup holders on the front of the glove box. You can do this with your fingers

Un-clip and pull up on the cup holders, freeing the parking brake in the process

1024

Step 2

              Aux Port               

• Pull back on the coin holder
• Be careful not to break any connections
• Disconnect the auxiliary port
• If the auxiliary port you received includes the casing, you can skip the next step.

Pull back on the coin holder

Be careful not to break any connections

Disconnect the auxiliary port

If the auxiliary port you received includes the casing, you can skip the next step.

Step 3

              Front Panel               

• Use a screwdriver or a plastic pry tool to push down on the connector’s clips.
• Remove the front panel

Use a screwdriver or a plastic pry tool to push down on the connector’s clips.

Remove the front panel

Step 4

              Connector               

• Push on the connector on the back of the auxiliary port to remove the port from the casing
• Pull out the port

Push on the connector on the back of the auxiliary port to remove the port from the casing

Pull out the port

To reassemble your the connector and the dash, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Isak Winter                     

Member since: 02/12/2021

602 Reputation

                                      1 Guide authored                  



                       Badges:
                       14







                                                        +11 more badges