2009 2014 Ford F 150 Mirror Blinker Light Replacement 2009 2010 2011 2012 2013 2014 Repair Guide

Difficulty

Easy

Steps

8

Time Required

Suggest a time??

Sections

1

• Mirror blinker light
• 8 steps

Flags

4

Grammar Police

Embrace your inner English teacher and help improve this guide’s grammar!

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• Back2009-2014 Ford F-150

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Open Hood               

• Open Hood: Open the hood using the hood latch inside the driver side of the car.
• Pull lever to release the hood.

Open Hood: Open the hood using the hood latch inside the driver side of the car.

Pull lever to release the hood.

1024

Step 2

              Disconnect Car Battery               

• Disconnect Battery: Use an adjustable wrench to disconnect the negative power from the battery (Turn clockwise, then lift).
• 8 mm socket wrench
• Be careful when disconnecting battery terminals. Make sure to push wires away.

Disconnect Battery: Use an adjustable wrench to disconnect the negative power from the battery (Turn clockwise, then lift).

8 mm socket wrench

Be careful when disconnecting battery terminals. Make sure to push wires away.

Step 3

              Remove Mirror Glass               

• Tilt Mirror Forward and Disconnect Mirror: Locate lock tabs behind the mirror. Apply pressure to all three tabs until the mirror unlatches and you can remove it.

Tilt Mirror Forward and Disconnect Mirror: Locate lock tabs behind the mirror. Apply pressure to all three tabs until the mirror unlatches and you can remove it.

Step 4

              Unscrew Backing               

• Unscrew Backing: Locate and unscrew 4 Torx T20 bolts holding backing and disconnect it from the mirror.
• Two Torx T20 bolts.

Unscrew Backing: Locate and unscrew 4 Torx T20 bolts holding backing and disconnect it from the mirror.

Two Torx T20 bolts.

Step 5

              Pull backing off               

• pull backing off

pull backing off

Step 6

              Disconnect Old Blinker Light               

• Disconnect Old Mirror Blinking Light: Disconnect the plug from the rear of the blinker light.

Disconnect Old Mirror Blinking Light: Disconnect the plug from the rear of the blinker light.

Step 7

              Install New Mirror Blinker Light               

• Install New Mirror Blinker Light: Slide new light into the mirror and press firmly until you hear a click.

Install New Mirror Blinker Light: Slide new light into the mirror and press firmly until you hear a click.

Step 8

              Connecting Wires to New Blinker Light               

• Reconnect Battery: Reconnect the negative power to the battery to restore power to the truck.
• Test Blinker: Test your blinker to ensure the new setup works and reassemble your mirror.

Reconnect Battery: Reconnect the negative power to the battery to restore power to the truck.

Test Blinker: Test your blinker to ensure the new setup works and reassemble your mirror.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Ali Bourguiba                     

Member since: 11/23/2021

157 Reputation

                                      1 Guide authored                  



                       Badges:
                       1