Difficulty
Moderate
Steps
12
Time Required
25 - 45 minutes
Sections
1
- Fog Lights
- 12 steps
Flags
2
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Back2009-2019 Dodge Ram
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Installing bright LED lights will always be popular. This modification plainly makes your vehicle look better. Apart from looking fantastic, your lighting range during night rides changes tremendously. This is a great benefit so the driver can see very clearly at night and avoid hitting things on the road.
What you need
Step 1
Fog Lights
- Pull the hood latch that is located beneath the steering column.
Pull the hood latch that is located beneath the steering column.
1024
Step 2
- Push the lever to the left to unlatch the hood of the truck.
Push the lever to the left to unlatch the hood of the truck.
Step 3
- Using the ratchet and 10mm socket, disconnect the negative battery terminal by turning counterclockwise.
- This is done to make sure you do not get shortages.
Using the ratchet and 10mm socket, disconnect the negative battery terminal by turning counterclockwise.
This is done to make sure you do not get shortages.
Step 4
- Disconnect the lighting harness.
- Do not remove the bulb since the new fog lamp comes with integrated LED bulbs.
Disconnect the lighting harness.
Do not remove the bulb since the new fog lamp comes with integrated LED bulbs.
Step 5
- Using the ratchet, extension, and the 10 mm socket unscrew the three 10 mm bolts to let the mounting plate free.
Using the ratchet, extension, and the 10 mm socket unscrew the three 10 mm bolts to let the mounting plate free.
Step 6
- Push the tabs inward and pull the mounting bracket towards you to separate the bracket from the fog lamp.
Push the tabs inward and pull the mounting bracket towards you to separate the bracket from the fog lamp.
Step 7
- Grab the new fog lamp and insert the three clips into the three holes of the mounting bracket.
Grab the new fog lamp and insert the three clips into the three holes of the mounting bracket.
Step 8
- Align the three screw holes on the mounting bracket with the holes on the bumper.
Align the three screw holes on the mounting bracket with the holes on the bumper.
Step 9
- Screw on the three 10 mm bolts in the holes.
- Tighten the bolts by hand first.
- Tighten the bolts using the 10 mm socket and ratchet.
Screw on the three 10 mm bolts in the holes.
Tighten the bolts by hand first.
Tighten the bolts using the 10 mm socket and ratchet.
Step 10
- Reconnect the lighting harness back up to get a power source.
Reconnect the lighting harness back up to get a power source.
Step 11
- Make sure the fog lamp is where it is desired and in place.
Make sure the fog lamp is where it is desired and in place.
Step 12
- Reconnect the negative battery terminal.
Reconnect the negative battery terminal.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Omar Guerrero
Member since: 09/25/2021
232 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
University of Memphis, Team S50-G1, Willis Fall 2021
Member of University of Memphis, Team S50-G1, Willis Fall 2021
UM-WILLIS-F21S50G1
1 Member
1 Guide authored
