2009 Subaru Impreza Wrx Rear Door Panel Replacement Repair Guide

Difficulty

Easy

Steps

11

Time Required

                          10 - 15 minutes            

Sections

1

• Rear Door Panel
• 11 steps

Flags

0

• Back2007-2011 Subaru Impreza

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Rear Door Panel               

• Pry off the plastic tab inside the rear door handle.

Pry off the plastic tab inside the rear door handle.

1024

Step 2

• Use the Phillips screwdriver to unscrew the 8x3/4" Phillips screw inside the door handle.

Use the Phillips screwdriver to unscrew the 8x3/4" Phillips screw inside the door handle.

Step 3

• Use a flathead screwdriver to pry up the plastic tab inside the rear door armrest.

Use a flathead screwdriver to pry up the plastic tab inside the rear door armrest.

Step 4

• Use the Phillips screwdriver to unscrew the 8x3/4" Phillips screw inside the armrest.

Use the Phillips screwdriver to unscrew the 8x3/4" Phillips screw inside the armrest.

Step 5

• Use flathead to pry off the upper panel located at the top of the rear door panel.

Use flathead to pry off the upper panel located at the top of the rear door panel.

Step 6

• Use the flathead screwdriver to pry off and remove the panel over the door handle.

Use the flathead screwdriver to pry off and remove the panel over the door handle.

Step 7

• Remove the bundle of wires from the panel by pressing the tabs on the sides of the large white plastic connector.

Remove the bundle of wires from the panel by pressing the tabs on the sides of the large white plastic connector.

Step 8

• Use the Phillips screwdriver to unscrew the 8x3/4" screws behind the door handle panel that was just removed.

Use the Phillips screwdriver to unscrew the 8x3/4" screws behind the door handle panel that was just removed.

Step 9

• Use the flathead screwdriver to pry off the door panel, starting from the outside edge of the door.

Use the flathead screwdriver to pry off the door panel, starting from the outside edge of the door.

Step 10

• Use your hands to pull off and remove the door panel from the frame.

Use your hands to pull off and remove the door panel from the frame.

Step 11

• Using your hands, remove the two remaining wires connecting the door panel to the frame.
• The door panel is now completely removed from the frame.

Using your hands, remove the two remaining wires connecting the door panel to the frame.

The door panel is now completely removed from the frame.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Joseph Coplon                     

Member since: 04/20/2015

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Cal Poly, Team 8-3, Regan Spring 2015                        

                                                  Member of Cal Poly, Team 8-3, Regan Spring 2015 



                    CPSU-REGAN-S15S8G3                     


                                            5 Members                     


                                            5 Guides authored