2010 2014 Ford Mustang Air Filter Replacement 2010 2011 2012 2013 2014 Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Air Filter
5 steps

Flags

Back2010-2014 Ford Mustang
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Step 1

              Air Filter

Make sure the vehicle is off before proceeding. Working under the cars hood can lead to burns if the car is still hot. Be careful!
Open the hood by pulling on the lever by the driver’s feet.
Push upward on the latch under the center of the hood to unlock it.

Make sure the vehicle is off before proceeding. Working under the cars hood can lead to burns if the car is still hot. Be careful!

Open the hood by pulling on the lever by the driver’s feet.

Push upward on the latch under the center of the hood to unlock it.

1024

Step 2

Locate the Air Box

Locate the Air Box

Step 3

Locate the two latches that keep the air box closed.
Push on the latch to open the air box as shown in the picture, and repeat on the second latch.
Pull up on the top part of the air box and push it to the front of the car to open.

Locate the two latches that keep the air box closed.

Push on the latch to open the air box as shown in the picture, and repeat on the second latch.

Pull up on the top part of the air box and push it to the front of the car to open.

Step 4

Make note of the orientation of the air filter before removing it.
Lift the filter straight up from the triangle corner and remove it.

Make note of the orientation of the air filter before removing it.

Lift the filter straight up from the triangle corner and remove it.

Step 5

Inspect for debris and dirt.
The first filter is dirty but does not need to be cleaned or replaced yet.
The second filter is dirty and does need to be cleaned or replaced
Do not discard the filter because it may be covered under a warranty.

Inspect for debris and dirt.

The first filter is dirty but does not need to be cleaned or replaced yet.

The second filter is dirty and does need to be cleaned or replaced

Do not discard the filter because it may be covered under a warranty.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 12 other contributors

                    Christopher Pell

Member since: 09/26/2012

239 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 15-45, Forte Fall 2012                        

                                                  Member of Cal Poly, Team 15-45, Forte Fall 2012 



                    CPSU-FORTE-F12S15G45                     


                                            5 Members                     


                                            6 Guides authored

Introduction#

Team#

Introduction

Team