2010 2014 Ford Mustang Spark Plug Replacement 2010 2011 2012 2013 2014 Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          1 hour            

Sections

1

• Spark Plug
• 8 steps

Flags

0

• Back2010-2014 Ford Mustang

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Spark Plug               

• Open the hood and prop it open using the hood prop.

Open the hood and prop it open using the hood prop.

1024

Step 2

• Pull the red tab out of the electrical connector and slide the connector off of the coil pack.

Pull the red tab out of the electrical connector and slide the connector off of the coil pack.

Step 3

• Remove the 10mm screw from the coil pack. Use the 10mm socket on the 3/8" drive ratchet to remove the screw.

Remove the 10mm screw from the coil pack. Use the 10mm socket on the 3/8" drive ratchet to remove the screw.

Step 4

• Remove the coil pack from cylinder.

Remove the coil pack from cylinder.

Step 5

• Loosen the spark plug completely using the 3/8" ratchet and extension with the 5/8" spark plug socket.

Loosen the spark plug completely using the 3/8" ratchet and extension with the 5/8" spark plug socket.

Step 6

• Remove the spark plug from the cylinder using the grabber tool.

Remove the spark plug from the cylinder using the grabber tool.

Step 7

• Inspect the spark plug for blackening or other damage.

Inspect the spark plug for blackening or other damage.

Step 8

• Check the spark plug gap using the spark plug gap gauge. Make sure the gap is within desired specifications.

Check the spark plug gap using the spark plug gap gauge. Make sure the gap is within desired specifications.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Alyssa Walser                     

Member since: 10/07/2019

184 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Eastern Washington University, Team S2-G10, Munoz Fall 2019                        

                                                  Member of Eastern Washington University, Team S2-G10, Munoz Fall 2019 



                    EWU-MUNOZ-F19S2G10                     


                                            3 Members                     


                                            1 Guide authored                     

CarGuy1991 - Jul 28, 2021

Reply

its a 9/16 socket for plugs for 3v heads( 05-10 mustangs gts) other than that great guide

Wil Xavier - Oct 30, 2021

Reply

“To reassemble your device, follow these instructions in reverse order”

-_-

John - Apr 20, 2022

Reply

What about right bank, you have to take off the plemum should you disconnect the neg on battery before you restart the engine??