Difficulty
Easy
Steps
6
Time Required
15 - 20 minutes
Sections
1
- Tail Light
- 6 steps
Flags
0
Back2007-2014 GMC Sierra
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Tail Light
- Open the hood of the truck.
- Using the 10mm wrench, loosen and remove the 1-3/4" bolt securing the cable.
- Pull the cable from the battery.
Open the hood of the truck.
Using the 10mm wrench, loosen and remove the 1-3/4" bolt securing the cable.
Pull the cable from the battery.
1024
Step 2
- Lower the tail gate fully.
- Remove objects near tail light.
Lower the tail gate fully.
Remove objects near tail light.
Step 3
- Using the Philips screwdriver, remove the two 4.8x16mm screws securing the housing.
Using the Philips screwdriver, remove the two 4.8x16mm screws securing the housing.
Step 4
- Pry the housing free.
- Be mindful of wires and dust.
Pry the housing free.
Be mindful of wires and dust.
Step 5
- Rotate the harness counterclockwise.
- Pull the harness free from the housing.
Rotate the harness counterclockwise.
Pull the harness free from the housing.
Step 6
- Wearing the latex gloves, pull the bad bulb out of the harness.
- Skin oil shortens the bulbs’ life spans.
Wearing the latex gloves, pull the bad bulb out of the harness.
Skin oil shortens the bulbs’ life spans.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Charles Swain
Member since: 06/19/2019
142 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
University of Memphis, Team S1-G4, Lane Summer 2019
Member of University of Memphis, Team S1-G4, Lane Summer 2019
UM-LANE-SU19S1G4
3 Members
1 Guide authored
ron murphy - Jul 27, 2022
Reply
Is there a way to get these things not to get moisture inside the backup bulb area?
