2010 Jeep Liberty Headlight Bulb Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          30 minutes

Sections

Headlight Bulb
4 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Back2008-2012 Jeep Liberty
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Headlight Bulb

Pop the hood of your vehicle by pulling the lever near the bottom of the driver’s side door.
Slide your hands under the unlatched hood to find the second lever. Push this lever to the right and lift the hood.
Be sure to use the hood prop to keep the hood from falling while you’re underneath it.

Pop the hood of your vehicle by pulling the lever near the bottom of the driver’s side door.

Slide your hands under the unlatched hood to find the second lever. Push this lever to the right and lift the hood.

Be sure to use the hood prop to keep the hood from falling while you’re underneath it.

1024

Step 2

Identify the bulb socket, located behind the headlight.
Rotate the base of the bulb counter-clockwise to remove it from the socket.
Remove the bulb from the green base by pulling the two apart.

Identify the bulb socket, located behind the headlight.

Rotate the base of the bulb counter-clockwise to remove it from the socket.

Remove the bulb from the green base by pulling the two apart.

Step 3

Insert the new bulb into the green base.
Be sure not to touch the glass with your fingers. If you do, wipe the bulb down with a soft cloth and some rubbing alcohol. Oils left behind from your fingers can shorten the life of the bulb.
Rotate clockwise to lock the bulb assembly into the socket.

Insert the new bulb into the green base.

Be sure not to touch the glass with your fingers. If you do, wipe the bulb down with a soft cloth and some rubbing alcohol. Oils left behind from your fingers can shorten the life of the bulb.

Rotate clockwise to lock the bulb assembly into the socket.

Step 4

Turn on headlights to ensure the new bulb is working properly.
You will want to check that your headlights are aligned on both sides. Adjust as needed.

Turn on headlights to ensure the new bulb is working properly.

You will want to check that your headlights are aligned on both sides. Adjust as needed.

Congratulations! You have a shiny new headlight.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.

Author

                                      with 6 other contributors

                    Ryan Griffin

Member since: 01/19/2016

227 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Oakland University, Team 6-1, Walwema Winter 2016                        

                                                  Member of Oakland University, Team 6-1, Walwema Winter 2016 



                    OAK-WALWEMA-W16S6G1                     


                                            10 Members                     


                                            10 Guides authored

Needs Better Images#

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Needs Better Images

Introduction

What you need

Team