Difficulty

Easy

Steps

6

Time Required

                          25 minutes

Sections

1

  • Headlight Bulb
  • 6 steps

Flags

0

  • BackToyota Corolla

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Whether it might be the cause of extreme weather, a burnt-out bulb, or a blown fuse.

Follow these 6 easy steps to have them replaced and running again.

Please note: This guide will only work if the problem is with the bulb and not the wiring. If the problem is with the wiring, please consult your mechanic.

(A good indication of a burnt-out bulb is to see if one headlight is working and the other is not. If both are not working, It could mean there is something wrong with the wiring and not the bulbs)

What you need

Step 1

              Headlight Bulb
  • Find the handle to open the Bonnet. It will be located at the bottom left-hand side of the driver’s seat.
  • Pull the handle towards yourself and you will see the bonnet pop up a small bit.

Find the handle to open the Bonnet. It will be located at the bottom left-hand side of the driver’s seat.

Pull the handle towards yourself and you will see the bonnet pop up a small bit.

1024

Step 2

  • Move the handle to the left in order to release the hood completely.
  • Locate the black stick and insert it in the bonnet hole.

Move the handle to the left in order to release the hood completely.

Locate the black stick and insert it in the bonnet hole.

Step 3

  • On the left, upper side of the hood, you can locate the bulb
  • Twist it halfway counter-clockwise and pull it out.

On the left, upper side of the hood, you can locate the bulb

Twist it halfway counter-clockwise and pull it out.

Step 4

  • Push the hook down to detach the bulb from the wire.

Push the hook down to detach the bulb from the wire.

Step 5

  • Replace it with a new bulb and turn it clockwise to have it fixed permanently.
  • If the bulb is not turned clockwise, the bulb will come off and become loose again.

Replace it with a new bulb and turn it clockwise to have it fixed permanently.

If the bulb is not turned clockwise, the bulb will come off and become loose again.

Step 6

  • Turn on the lights to make sure both headlights are working :)

Turn on the lights to make sure both headlights are working :)

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor 


                    Shahbaz Khan

Member since: 01/19/2022

193 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       York University, Team 2-12, O'Regan Winter 2022                        

                                                  Member of York University, Team 2-12, O'Regan Winter 2022 



                    YORK-O'REGAN-W22S2G12                     


                                            1 Member                     


                                            1 Guide authored