2011 2013 Scion Tc Car Battery Replacement 2011 2012 2013 Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          5 - 10 minutes            

Sections

1

• Car Battery
• 5 steps

Flags

2

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Better Introduction

Improve this guide by completing or revising its introduction.

• Back2011-2013 Scion tC

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Car Battery               

• Begin by opening the hood of the car and locating the battery on the front of the driver side in the engine compartment

Begin by opening the hood of the car and locating the battery on the front of the driver side in the engine compartment

1024

Step 2

• Using a socket wrench, loosen the 2 (5/16 inch) nuts on the top of the battery support bracket
• Remove the bracket by lifting up

Using a socket wrench, loosen the 2 (5/16 inch) nuts on the top of the battery support bracket

Remove the bracket by lifting up

Step 3

• After removing the bracket, locate the supporting rod behind the battery
• The rod is hooked on a hole in the metal behind the battery. Unhook the rod and remove it

After removing the bracket, locate the supporting rod behind the battery

The rod is hooked on a hole in the metal behind the battery. Unhook the rod and remove it

Step 4

• Start with the negative terminal of the battery
• Loosen the nut on the negative terminal with a 10mm socket wrench
• Remove the wire by slightly twisting and pulling up

Start with the negative terminal of the battery

Loosen the nut on the negative terminal with a 10mm socket wrench

Remove the wire by slightly twisting and pulling up

Step 5

• Remove the cap from the positive terminal of the battery
• Using a 10mm socket wrench, loosen the nut on the positive terminal
• Remove the wire from the positive terminal by slightly twisting and pulling up
• Remove the battery by lifting it out of the engine compartment

Remove the cap from the positive terminal of the battery

Using a 10mm socket wrench, loosen the nut on the positive terminal

Remove the wire from the positive terminal by slightly twisting and pulling up

Remove the battery by lifting it out of the engine compartment

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Travis Michael                     

Member since: 05/08/2015

140 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Cal Poly, Team 8-2, Regan Spring 2015                        

                                                  Member of Cal Poly, Team 8-2, Regan Spring 2015 



                    CPSU-REGAN-S15S8G2                     


                                            5 Members                     


                                            7 Guides authored