Difficulty
Easy
Steps
6
Time Required
5 minutes
Sections
1
- Interior Map Light
- 6 steps
Flags
0
Back2011-2015 Kia Optima
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Before using this guide, make sure that the vehicle is powered off completely.
What you need
Step 1
Interior Map Light
- Wedge the tip of the prying tool between the lens and the console.
- Gently pry the lens off of the console.
Wedge the tip of the prying tool between the lens and the console.
Gently pry the lens off of the console.
1024
Step 2
- Separate the lens from the clips connecting the lens and the console.
Separate the lens from the clips connecting the lens and the console.
Step 3
- Gently twist or pull away the bulb from the connection.
Gently twist or pull away the bulb from the connection.
Step 4
- Insert the new bulb into the connection.
- Some bulbs are polarity specific, so if at first the bulb does not work, try flipping it 180 degrees and connect it again.
Insert the new bulb into the connection.
Some bulbs are polarity specific, so if at first the bulb does not work, try flipping it 180 degrees and connect it again.
Step 5
- Reattach the lens back onto the console by clipping it back into place.
Reattach the lens back onto the console by clipping it back into place.
Step 6
- Push the lens into the console. When you hear a click, the lens has been attached properly.
Push the lens into the console. When you hear a click, the lens has been attached properly.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Ariel Miranda
Member since: 04/20/2021
133 Reputation
1 Guide authored
Badges:
2
Team
CSU Los Angeles, Team S1-G120, Harris Spring 2021
Member of CSU Los Angeles, Team S1-G120, Harris Spring 2021
CSULA-HARRIS-S21S1G120
1 Member
1 Guide authored
