Difficulty

Easy

Steps

6

Time Required

                          3 minutes            

Sections

1

  • Key Fob Battery
  • 6 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • Back2011-2017 Honda Odyssey

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Video Overview

Step 1

              Remove Mechanical Key               
  • Remove the mechanical key by moving the tab on back of key & pulling out the key.

Remove the mechanical key by moving the tab on back of key & pulling out the key.

1024

Step 2

              Separate Shell               
  • Separate the shell using a large screw driver or by using the mechanical key. The shells have a separating tab in the middle. Pry open the shell by gently twisting the screwdriver or the mechanical key into the separating tab.

Separate the shell using a large screw driver or by using the mechanical key. The shells have a separating tab in the middle. Pry open the shell by gently twisting the screwdriver or the mechanical key into the separating tab.

Step 3

              Remove Battery               
  • Remove the battery carefully using a small screw driver.

Remove the battery carefully using a small screw driver.

Step 4

              Replace Battery               
  • Replace the battery. Make sure not to damage the 2 tabs holding the battery. Do not press or force the battery into its place, slide it underneath the tabs.
  • Battery : Lithium Coin Battery CR2032 3V

Replace the battery. Make sure not to damage the 2 tabs holding the battery. Do not press or force the battery into its place, slide it underneath the tabs.

Battery : Lithium Coin Battery CR2032 3V

Step 5

              Re-assemble Shell               
  • Put the outer shell together and gently press and snap the two half’s in place

Put the outer shell together and gently press and snap the two half’s in place

Step 6

              Mechanical key               
  • Put the mechanical key back

Put the mechanical key back

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    A nibeS                     

Member since: 08/17/2020

163 Reputation

                                      1 Guide authored                  



                       Badges:
                       3