Difficulty

Moderate

Steps

10

Time Required

                          20 - 30 minutes

Sections

1

  • Indicator Bulb
  • 10 steps

Flags

2

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackFord Fiesta

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Indicator Bulb
  • Park the car where you have room to work.
  • Check that the hand brake is on and the engine is off.
  • Wait for the car to cool down before opening the hood. The hot air from the engine may damage the eyes and cause burns.
  • Ensure that the car has rested for at least 30 minutes.

Park the car where you have room to work.

Check that the hand brake is on and the engine is off.

Wait for the car to cool down before opening the hood. The hot air from the engine may damage the eyes and cause burns.

Ensure that the car has rested for at least 30 minutes.

1024

Step 2

  • Pull the hood release under the driver’s dashboard towards you.

Pull the hood release under the driver’s dashboard towards you.

Step 3

  • Make sure there is space to insert fingers. If not, repeat step 2.
  • Push the yellow hood release to the left to open the hood.

Make sure there is space to insert fingers. If not, repeat step 2.

Push the yellow hood release to the left to open the hood.

Step 4

  • Lift the hood with one hand and place the strut upright in the correct position.
  • Place strut in the hole to the left of the hood.

Lift the hood with one hand and place the strut upright in the correct position.

Place strut in the hole to the left of the hood.

Step 5

  • Use a flathead screwdriver to loosen the lower retained screw.
  • Collect the screws and store them somewhere safe.

Use a flathead screwdriver to loosen the lower retained screw.

Collect the screws and store them somewhere safe.

Step 6

  • Remove the upper retained screw.
  • Store the screw in a safe place.

Remove the upper retained screw.

Store the screw in a safe place.

Step 7

  • Carefully remove the headlight.
  • The headlight is attached to three electrical connectors.
  • Gently pull up and towards your body.
  • Set the headlight to the side.

Carefully remove the headlight.

The headlight is attached to three electrical connectors.

Gently pull up and towards your body.

Set the headlight to the side.

Step 8

  • Press both ends of the bulb container to remove the electrical connector from the bulb container.

Press both ends of the bulb container to remove the electrical connector from the bulb container.

Step 9

  • Pull out the bulb from the headlight.
  • Press both ends of the electrical connector to separate from the bulb container.

Pull out the bulb from the headlight.

Press both ends of the electrical connector to separate from the bulb container.

Step 10

  • Make sure you do not hold the glass surface with your bare hands. The bulb may malfunction from the sweat in your hands.
  • Hold the black part of the bulb.
  • The bulb might break, so be sure to wear gloves and protective glasses.

Make sure you do not hold the glass surface with your bare hands. The bulb may malfunction from the sweat in your hands.

Hold the black part of the bulb.

The bulb might break, so be sure to wear gloves and protective glasses.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Phillip Kataswa

Member since: 07/01/2021

181 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       York University, Team S2-G13, Melo-Thaiss Summer 2021                        

                                                  Member of York University, Team S2-G13, Melo-Thaiss Summer 2021 



                    YORK-MELO-THAISS-SU21S2G13                     


                                            1 Member                     


                                            1 Guide authored