Difficulty
Easy
Steps
10
Time Required
5 - 10 minutes
Sections
1
- Headlight Bulb
- 10 steps
Flags
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackNissan
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Before beginning this repair, turn off the car, engage the parking brake, and disconnect the battery.
What you need
Step 1
Headlight Bulb
- Pull the hood lever.
Pull the hood lever.
1024
Step 2
- Push the lever underneath the hood to the left.
- The lever is located in the center underneath the hood.
Push the lever underneath the hood to the left.
The lever is located in the center underneath the hood.
Step 3
- Pull up the hood.
Pull up the hood.
Step 4
- Insert the support rod into the slot.
- The stent is located to the right of the hood.
- The slot is located in the underside of the hood to the right.
Insert the support rod into the slot.
The stent is located to the right of the hood.
The slot is located in the underside of the hood to the right.
Step 5
- Pull out the connector from the bulb.
- Depending on the make of your vehicle, you may have push the tab on the connector that reads “push” before pulling out the connector.
Pull out the connector from the bulb.
Depending on the make of your vehicle, you may have push the tab on the connector that reads “push” before pulling out the connector.
Step 6
- Twist the plastic ring out from the bulb.
Twist the plastic ring out from the bulb.
Step 7
- Pull out the old bulb.
- High pressure halogen gas is sealed inside the halogen bulb. The bulb may break if the glass envelope is scratched or the bulb is dropped.
- When handling the bulb, do not touch the glass envelope.
Pull out the old bulb.
High pressure halogen gas is sealed inside the halogen bulb. The bulb may break if the glass envelope is scratched or the bulb is dropped.
When handling the bulb, do not touch the glass envelope.
Step 8
- Insert the replacement bulb.
- High pressure halogen gas is sealed inside the halogen bulb. The bulb may break if the glass envelope is scratched or the bulb is dropped.
- When handling the bulb, do not touch the glass envelope.
Insert the replacement bulb.
Step 9
- Twist the plastic ring back onto the bulb.
Twist the plastic ring back onto the bulb.
Step 10
- Insert the connector into the bulb.
Insert the connector into the bulb.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Chelsea Chineme
Member since: 09/28/2021
205 Reputation
1 Guide authored
Badges:
2
Team
University of North Texas, Team 2-8, Raign Fall 2021
Member of University of North Texas, Team 2-8, Raign Fall 2021
UNT-RAIGN-F21S2G8
2 Members
2 Guides authored
