Difficulty

Easy

Steps

7

Time Required

                          10 - 15 minutes

Sections

1

  • Windshield Wiper
  • 7 steps

Flags

0

  • Back2004-2013 BMW 3 Series

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Windshield Wiper
  • To begin, open the hood and make sure the broken wiper’s body is completely positioned on the hood.
  • This is done to prevent scratches from developing throughout the repair process.

To begin, open the hood and make sure the broken wiper’s body is completely positioned on the hood.

This is done to prevent scratches from developing throughout the repair process.

1024

Step 2

  • Use your fingers to pop the cover off that holds the wiper in place.

Use your fingers to pop the cover off that holds the wiper in place.

Step 3

  • Use a back and forth motion to carefully remove the wiper blade from the wiper arm. and then pull it out.

Use a back and forth motion to carefully remove the wiper blade from the wiper arm. and then pull it out.

Step 4

  • Install the replacement wiper so that the slightly bent angle side faces the vehicle.

Install the replacement wiper so that the slightly bent angle side faces the vehicle.

Step 5

  • Check that the screw is aligned with the hole.
  • With a little pressure, slowly slide the new wiper into place.

Check that the screw is aligned with the hole.

With a little pressure, slowly slide the new wiper into place.

Step 6

  • Once it is positioned correctly, lock the cover to keep the blade in place.
  • If you hear a click, you will know you have succeeded.
  • Lower the windshield wiper carefully onto the windshield.

Once it is positioned correctly, lock the cover to keep the blade in place.

If you hear a click, you will know you have succeeded.

Lower the windshield wiper carefully onto the windshield.

Step 7

  • Finally, test your wiper blades by spraying water or windshield wiper cleaner over your windshield and turning on the wipers.
  • You are done if they are wiping properly. If they appear to be loose, make sure they are securely attached before driving again.

Finally, test your wiper blades by spraying water or windshield wiper cleaner over your windshield and turning on the wipers.

You are done if they are wiping properly. If they appear to be loose, make sure they are securely attached before driving again.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Hafsa Yusuf

Member since: 09/14/2021

145 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       York University, Team R-30, Melo-Thaiss Winter 2022                        

                                                  Member of York University, Team R-30, Melo-Thaiss Winter 2022 



                    YORK-MELO-THAISS-W22SRG30                     


                                            1 Member                     


                                            1 Guide authored