Difficulty

Easy

Steps

9

Time Required

                          45 minutes

Sections

1

  • 2012 Nissan Murano Driver Side Mirror
  • 9 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • Back2008-2014 Nissan Murano

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              2012 Nissan Murano Driver Side Mirror
  • Pull out the Driver preset panel, if your options package included this. Usually no tools required.

Pull out the Driver preset panel, if your options package included this. Usually no tools required.

1024

Step 2

  • Expose one of three screws by prying the door handle trim plate out.

Expose one of three screws by prying the door handle trim plate out.

Step 3

  • Pry out the door lock and window control panel. Disconnect all connectors on the back side.

Pry out the door lock and window control panel. Disconnect all connectors on the back side.

Step 4

  • Pry up the arm rest to expose the second hidden screw (total of 3).

Pry up the arm rest to expose the second hidden screw (total of 3).

Step 5

  • Now you can remove all three hidden screws with the 10mm socket or philips screw driver.

Now you can remove all three hidden screws with the 10mm socket or philips screw driver.

Step 6

  • Now the door panel itself can be pried off the door. Starting at the bottom, find the plastic friction plugs and pull enough to pop them out one by one.
  • Then lift the door panel up off the door. You do not need to remove it completly. This should give you enough room to work on the mirror in the next steps.

Now the door panel itself can be pried off the door. Starting at the bottom, find the plastic friction plugs and pull enough to pop them out one by one.

Then lift the door panel up off the door. You do not need to remove it completly. This should give you enough room to work on the mirror in the next steps.

Step 7

  • Pull the inside mirror cover off.

Pull the inside mirror cover off.

Step 8

  • Unplug the mirror wiring harness. The connector on the door will stay put.

Unplug the mirror wiring harness. The connector on the door will stay put.

Step 9

  • Remove the three nuts holding the mirror on to the door. Depending on the age of your vehicle, you may want to clean off the remaining area so the new mirror seals good.

Remove the three nuts holding the mirror on to the door. Depending on the age of your vehicle, you may want to clean off the remaining area so the new mirror seals good.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 3 other contributors 


                    Gajtguy

Member since: 12/15/2013

177 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges