Difficulty

Easy

Steps

7

Time Required

                          5 - 10 minutes

Sections

1

  • Windshield Wiper
  • 7 steps

Flags

0

  • Back2012-Present Toyota Corolla

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Before beginning this repair, turn off the car and engage the parking brake.

What you need

Step 1

              Windshield Wiper
  • Lift up the windshield wiper you’re replacing.

Lift up the windshield wiper you’re replacing.

1024

Step 2

  • Insert a flathead screwdriver into the locking mechanism of the wiper and gently pry it open.
  • You can use your car keys in case you do not have a screwdriver.

Insert a flathead screwdriver into the locking mechanism of the wiper and gently pry it open.

You can use your car keys in case you do not have a screwdriver.

Step 3

  • Push the wiper blade downwards until it locks into place.

Push the wiper blade downwards until it locks into place.

Step 4

  • Angle the wiper away from you, so that the top is near you while the bottom is farther away.
  • Gently push the blade out of the wiper base.

Angle the wiper away from you, so that the top is near you while the bottom is farther away.

Gently push the blade out of the wiper base.

Step 5

  • Bring the new wiper blade into the wiper base from the car, aiming it so that the wiper base enters the lock hole.
  • Once the wiper blade is in, hold it from the bottom and push it upwards to secure the hold.
  • Make sure to start with the lock open, and that the blade is facing the same direction as the picture.

Bring the new wiper blade into the wiper base from the car, aiming it so that the wiper base enters the lock hole.

Once the wiper blade is in, hold it from the bottom and push it upwards to secure the hold.

Make sure to start with the lock open, and that the blade is facing the same direction as the picture.

Step 6

  • Push down the lock with force until it clicks.

Push down the lock with force until it clicks.

Step 7

  • Repeat for the second blade.
  • Your windshield wiper blade replacement is now complete!

Repeat for the second blade.

Your windshield wiper blade replacement is now complete!

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Yusuf Gabaire

Member since: 07/03/2021

157 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       York University, Team 2-6, O'Regan Fall 2021                        

                                                  Member of York University, Team 2-6, O'Regan Fall 2021 



                    YORK-O'REGAN-F21S2G6                     


                                            1 Member                     


                                            1 Guide authored