Difficulty

Easy

Steps

7

Time Required

                          6 - 9 minutes

Sections

1

  • Key Fob Battery
  • 7 steps

Flags

0

  • Back2013-2020 Nissan Rogue

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

It’s important to realize that 2013 Nissan Rogue is a push-to-start vehicle and in order to start the car, the key must be in close proximity. Without a functioning battery, the car will not be able to receive signals from the keyless remote to know it is in proximity to start the car.

What you need

Step 1

              Key Fob Battery
  • Remove the key from the keyring by pulling the button on the back of the keyring from right to left while pulling the loop at the top.

Remove the key from the keyring by pulling the button on the back of the keyring from right to left while pulling the loop at the top.

1024

Step 2

  • Carefully separate the back cover from the rest of the remote.
  • You can use a tool to make this step easier, or you can just do it using your fingers, being very careful.

Carefully separate the back cover from the rest of the remote.

You can use a tool to make this step easier, or you can just do it using your fingers, being very careful.

Step 3

  • Carefully remove the individual pieces from inside, one at a time.
  • There are two pieces in total to remove.

Carefully remove the individual pieces from inside, one at a time.

There are two pieces in total to remove.

Step 4

  • Remove the battery from the remote.
  • Put the new battery into the remote and press down firmly to make sure it is secure.
  • Be sure to check that your new battery matches with your old battery.

Remove the battery from the remote.

Put the new battery into the remote and press down firmly to make sure it is secure.

Be sure to check that your new battery matches with your old battery.

Step 5

  • Carefully snap the back cover onto the rest of the remote.

Carefully snap the back cover onto the rest of the remote.

Step 6

  • Put the key back into the remote.

Put the key back into the remote.

Step 7

  • Test the remote key to make sure it works properly.

Test the remote key to make sure it works properly.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor 


                    Hober Granados

Member since: 01/31/2022

172 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       CSU Los Angeles, Team Z-25, Briggs Spring 2022                        

                                                  Member of CSU Los Angeles, Team Z-25, Briggs Spring 2022 



                    CSULA-BRIGGS-S22SZG25                     


                                            1 Member                     


                                            1 Guide authored