Difficulty

Easy

Steps

7

Time Required

                          10 - 20 minutes

Sections

1

  • Headlight
  • 7 steps

Flags

0

  • BackHyundai

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Before begin, you’ll need H7 headlight bulbs to replace you the old ones. No tools are necessary for this repair.

  • Caution: When lifting open your hood be sure its locked in place to ensure it does not fall on you while in the middle of your repair and lead to an injury.Note: It is illegal to drive with a broken headlight, so if yours isn’t working, replace it as soon as possible to avoid a ticket.

Before starting this repair, park in safe, flat space, turn off the car, and put on the emergency brake.

What you need

Step 1

              Headlight
  • Before beginning this repair, park in a safe, flat space, turn off the car, and put on the emergency brake.

Before beginning this repair, park in a safe, flat space, turn off the car, and put on the emergency brake.

1024

Step 2

  • Pull the latch on the drivers side interior to release the lock on the hood.
  • Lift and open the hood of your car until it stays open on its own.

Pull the latch on the drivers side interior to release the lock on the hood.

Lift and open the hood of your car until it stays open on its own.

Step 3

  • Your headlights are located on the left and right sides of the front of your vehicle and are covered by a cap.

Your headlights are located on the left and right sides of the front of your vehicle and are covered by a cap.

Step 4

  • Twist the cap to the left and pull it off.
  • Twist the headlight to the left and pull it out too.

Twist the cap to the left and pull it off.

Twist the headlight to the left and pull it out too.

Step 5

  • Pull the headlight bulb out of the socket.

Pull the headlight bulb out of the socket.

Step 6

  • Plug the new headlight into the socket and place it back into its space.
  • Don’t touch the bulb glass with your fingers because the oil from your hands will cause the glass to degrade and wear faster or shatter.
  • Lock it into place by twisting it slightly to the right.
  • Put the cap back on and twist it slightly to the right to lock it in place.

Plug the new headlight into the socket and place it back into its space.

Don’t touch the bulb glass with your fingers because the oil from your hands will cause the glass to degrade and wear faster or shatter.

Lock it into place by twisting it slightly to the right.

Put the cap back on and twist it slightly to the right to lock it in place.

Step 7

  • Close your hood.
  • Turn your car on and test your new headlight to see if it works.
  • Congratulations!

Close your hood.

Turn your car on and test your new headlight to see if it works.

Congratulations!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Enrique Cisneros

Member since: 11/25/2022

145 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       CSU Los Angeles, Team 1-1, Briggs Winter 2022                        

                                                  Member of CSU Los Angeles, Team 1-1, Briggs Winter 2022 



                    CSULA-BRIGGS-W22S1G1                     


                                            1 Member                     


                                            1 Guide authored